The compatObjectFormat extension is used to hide an incomplete
feature that is not yet usable for any purpose other than
developing the feature further. Document it as such to discourage
its use by mere mortals.
* bc/doc-compat-object-format-not-working:
docs: note that extensions.compatobjectformat is incomplete
The "do you still use it?" message given by a command that is
deeply deprecated and allow us to suggest alternatives has been
updated.
* kh/you-still-use-whatchanged-fix:
BreakingChanges: remove claim about whatchanged reports
whatchanged: remove not-even-shorter clause
whatchanged: hint about git-log(1) and aliasing
you-still-use-that??: help the user help themselves
t0014: test shadowing of aliases for a sample of builtins
git: allow alias-shadowing deprecated builtins
git: move seen-alias bookkeeping into handle_alias(...)
git: add `deprecated` category to --list-cmds
Makefile: don’t add whatchanged after it has been removed
This was written in e836757e14 (whatschanged: list it in
BreakingChanges document, 2025-05-12) which was on the same
topic that added the `--i-still-use-this` requirement.[1]
Maybe it was a work-in-progress comment/status.
[1]: jc/you-still-use-whatchanged
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The closest equivalent is `git log --raw --no-merges`.
Also change to “defaults” (implicit plural).
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Give the user a list of suggestions for what to do when they run a
deprecated command.
The first order of action will be to check the breaking changes
document;[1] this short error message says nothing about why this
command is deprecated, and in any case going into any kind of detail
might overwhelm the user.
Then they can find out if this has been discussed on the mailing list.
Then users who e.g. are using git-whatchanged(1) can learn that this is
arguably a plug-in replacement:
git log <opts> --raw --no-merges
Finally they are invited to send an email to the mailing list.
Also drop the “please add” part in favor of just using the “refusing”
die-message; these two would have been right after each other in this
new version.
Also drop “Thanks” since it now would require a new paragraph.
[1]: www.git-scm.com has a disclaimer for these internal documents that
says that “This information is specific to the Git project”. That’s
misleading in this particular case. But users are unlikely to get
discouraged from reading about why they (or their programs) cannot run a
command any more; it clearly concerns them.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The previous commit added tests for shadowing deprecated builtins.
Let’s make the test suite more complete by exercising a sample of
the builtins and in turn test the documentation for git-config(1):
To avoid confusion and troubles with script usage, aliases that hide
existing Git commands are ignored except for deprecated commands.
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
git-whatchanged(1) is deprecated and you need to pass
`--i-still-use-this` in order to force it to work as before.
There are two affected users, or usages:
1. people who use the command in scripts; and
2. people who are used to using it interactively.
For (1) the replacement is straightforward.[1] But people in (2) might
like the name or be really used to typing it.[3]
An obvious first thought is to suggest aliasing `whatchanged` to the
git-log(1) equivalent.[1] But this doesn’t work and is awkward since you
cannot shadow builtins via aliases.
Now you are left in an uncomfortable limbo; your alias won’t work until
the command is removed for good.
Let’s lift this limitation by allowing *deprecated* builtins to be
shadowed by aliases.
The only observed demand for aliasing has been for git-whatchanged(1),
not for git-pack-redundant(1). But let’s be consistent and treat all
deprecated commands the same.
[1]:
git log --raw --no-merges
With a minor caveat: you get different outputs if you happen to
have empty commits (no changes)[2]
[2]: https://lore.kernel.org/git/20250825085428.GA367101@coredump.intra.peff.net/
[3]: https://lore.kernel.org/git/BL3P221MB0449288C8B0FA448A227FD48833AA@BL3P221MB0449.NAMP221.PROD.OUTLOOK.COM/
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
We are about to complicate the command handling by allowing *deprecated*
builtins to be shadowed by aliases. We need to organize the code in
order to facilitate that.[1]
The code in the `while(1)` speculatively adds commands to the list
before finding out if it’s an alias. Let’s instead move it inside
`handle_alias(...)`—where it conceptually belongs anyway—and in turn
only run this logic when we have found an alias.[2]
[1]: We will do that with an additional call to `handle_alias(1)` inside
the loop. *Not* moving this code leaves a blind spot; we will miss
alias looping crafted via deprecated builtin names
[2]: Also rename the list to a more descriptive name
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
With 145 builtin commands (according to `git --list-cmds=builtins`),
users are probably not keeping on top of which ones (if any) are
deprecated.
Let’s expand the experimental `--list-cmds`[1] to allow users and
programs to query for this information. We will also use this in an
upcoming commit to implement `is_deprecated_command`.
[1]: Using something which is experimental to query for deprecations is
perhaps not the most ideal approach, but it is simple to implement
and better than having to scan the documentation
Acked-by: Patrick Steinhardt <ps@pks.im>
Helped-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
07572f220a (whatchanged: remove when built with WITH_BREAKING_CHANGES,
2025-05-12) set up the removal of git-whatchanged(1) when
`WITH_BREAKING_CHANGES` is active. Part of that work was removing it
from `commands` in `git.c`. But the Makefile still lists it as a
builtin. That leaves it in the limbo of being linked but not being
callable; you get the generic error about not being able to call it as
a *builtin*:
$ git whatchanged
fatal: cannot handle whatchanged as a builtin
instead of the expected:
$ git whatchanged
git: 'whatchanged' is not a git command. See 'git --help'.
Based-on-patch-by: Jeff King <peff@peff.net>
Signed-off-by: Kristoffer Haugsbakk <code@khaugsbakk.name>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The compatibility object format is only implemented for loose objects,
not packed objects, so anyone attempting to push or fetch data into a
repository with this option will likely not see it work as expected. In
addition, the underlying storage of loose object mapping is likely to
change because the current format is inefficient and does not handle
important mapping information such as that of submodules.
It would have been preferable to initially document that this was not
yet ready for prime time, but we did not do so. We hinted at the fact
that this functionality is incomplete in the description, but did not
say so explicitly. Let's do so now: indicate that this feature is
incomplete and subject to change and that the option is not designed to
be used by end users.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
As part of 9bbc981c6f (t/unit-tests: finalize migration of
reftable-related tests, 2025-07-24), the explicit list of
`UNIT_TEST_PROGRAMS` was turned into a wildcard pattern-derived list.
Let's do the same in the CMake definition.
This fixes build errors with symptoms like this:
CMake Error at CMakeLists.txt:132 (string):
string sub-command REPLACE requires at least four arguments.
Call Stack (most recent call first):
CMakeLists.txt:1037 (parse_makefile_for_scripts)
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Edit: We are continuing to follow the existing PO file convention, which
includes filenames but strips out line numbers from the file-location
comments. This standard was set by our former lead, Jordi Mas, and we
are maintaining it for project-wide consistency.
Signed-off-by: Mikel Forcada <mikel.forcada@gmail.com>
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
3a54f5bd5d (merge/pull: add the "--compact-summary" option, 2025-06-12)
added the option --compact-summary to both merge and pull. It takes no
no argument, but for merge it got an argument help string. Remove it,
since it is unnecessary.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
dabecb9db2 (for-each-ref: introduce a '--start-after' option,
2025-07-15) added the option --start-after and referred to its argument
as "marker" in documentation and usage string, but not in the option's
short help. Use "marker" there as well for consistency and brevity.
Signed-off-by: René Scharfe <l.s.r@web.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Improve wording and fix typos for a couple entries part of the Git 2.51
release notes.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The deflate codepath in "git archive --format=zip" had a
longstanding bug coming from misuse of zlib API, which has been
corrected.
* jt/archive-zip-deflate-fix:
archive: flush deflate stream until Z_STREAM_END
Squelch false-positive compiler warning.
* dl/squelch-maybe-uninitialized:
t/unit-tests/clar: fix -Wmaybe-uninitialized with -Og
remote: bail early from set_head() if missing remote name
The case where a new submodule takes a path where used to be a
completely different subproject is now dealt a bit better than
before.
* kj/renamed-submodule:
fixup! submodule: skip redundant active entries when pattern covers path
fixup! submodule: prevent overwriting .gitmodules on path reuse
submodule: skip redundant active entries when pattern covers path
submodule: prevent overwriting .gitmodules on path reuse
"git -c alias.foo=bar foo -h baz" reported "'foo' is aliased to
'bar'" and then went on to run "git foo -h baz", which was
unexpected. Tighten the rule so that alias expansion is reported
only when "-h" is the sole option.
* rs/tighten-alias-help:
git: show alias info only with lone -h
Reduce implicit assumption and dependence on the_repository in the
object-file subsystem.
* ps/object-file-wo-the-repository:
object-file: get rid of `the_repository` in index-related functions
object-file: get rid of `the_repository` in `force_object_loose()`
object-file: get rid of `the_repository` in `read_loose_object()`
object-file: get rid of `the_repository` in loose object iterators
object-file: remove declaration for `for_each_file_in_obj_subdir()`
object-file: inline `for_each_loose_file_in_objdir_buf()`
object-file: get rid of `the_repository` when writing objects
odb: introduce `odb_write_object()`
loose: write loose objects map via their source
object-file: get rid of `the_repository` in `finalize_object_file()`
object-file: get rid of `the_repository` in `loose_object_info()`
object-file: get rid of `the_repository` when freshening objects
object-file: inline `check_and_freshen()` functions
object-file: get rid of `the_repository` in `has_loose_object()`
object-file: stop using `the_hash_algo`
object-file: fix -Wsign-compare warnings
When building with -Og on gcc 15.1.1, the build produces a warning. In
practice, though, this cannot be hit because `exact` acts as a guard and
that variable can only be set after `matchlen` is already initialized
Assign a default value to `matchlen` so that the warning is silenced.
Signed-off-by: Denton Liu <liu.denton@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
