We newly handle isatty() by special-casing the stdin/stdout/stderr file
descriptors, caching the return value. However, we missed the case where
dup2() overrides the respective file descriptor.
That poses a problem e.g. where the `show` builtin asks for a pager very
early, the `setup_pager()` function sets the pager depending on the
return value of `isatty()` and then redirects stdout. Subsequently,
`cmd_log_init_finish()` calls `setup_pager()` *again*. What should
happen now is that `isatty()` reports that stdout is *not* a TTY and
consequently stdout should be left alone.
Let's override dup2() to handle this appropriately.
This fixes https://github.com/git-for-windows/git/issues/1077
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This does not (yet) resolve the problem that Strg+T with multiple
selected lines fails to (un)stage them all, but it addresses one of
the reported Ctrl+T issues.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We should not actually expect the first `attrib.exe` in the PATH to
be the one we are looking for. Or that it is in the PATH, for that
matter.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
A change between versions 2.4.1 and 2.6.0 of the MSYS2 runtime modified
how Cygwin's runtime (and hence Git for Windows' MSYS2 runtime
derivative) handles locales: d16a56306d (Consolidate wctomb/mbtowc calls
for POSIX-1.2008, 2016-07-20).
An unintended side-effect is that "cold-calling" into the POSIX
emulation will start with a locale based on the current code page,
something that Git for Windows is very ill-prepared for, as it expects
to be able to pass a command-line containing non-ASCII characters to the
shell without having those characters munged.
One symptom of this behavior: when `git clone` or `git fetch` shell out
to call `git-upload-pack` with a path that contains non-ASCII
characters, the shell tried to interpret the entire command-line
(including command-line parameters) as executable path, which obviously
must fail.
This fixes https://github.com/git-for-windows/git/issues/1036
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The fix we introduced in Git for Windows will be made obsolete by a more
general fix that has been already accepted into upstream Git's `next`
branch.
But we still can introduce a regression test that verifies that this bug
will be caught very quickly, if reintroduced.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The gui.recentrepo list may be longer than the maxrecent setting.
Allow extra space to show any extra entries.
In an ideal world, the git gui would limit the number of entries
to the maxrecent setting, however the recentrepo config list may
have been extended outwith the gui, or the maxrecent setting changed
to a reduced value. Further, when testing the gui's recentrepo
logic it is useful to show these extra, but valid, entries.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Previously unstaged files can be staged by clicking on them and then
pressing Ctrl+T. Conveniently, the next unstaged file is selected
automatically so that the unstaged files can be staged by repeatedly
pressing Ctrl+T.
When a user hits Ctrl+T one time too many, though, Git GUI used to throw
this exception:
expected number but got ""
expected number but got ""
while executing
"expr {int([lindex [$w tag ranges in_diff] 0])}"
(procedure "toggle_or_diff" line 13)
invoked from within
"toggle_or_diff toggle .vpane.files.workdir.list "
(command bound to event)
Let's just avoid that by skipping the operation when there are no more
files to stage.
This fixes https://github.com/git-for-windows/git/issues/1060
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
When the gui/user selects a repo for display, that repo is brought to
the end of the recentrepo config list. The logic can fail if there are
duplicate old entries for the repo (you cannot unset a single config
entry when duplicates are present).
Similarly, the maxrecentrepo logic could fail if older duplicate entries
are present.
The first commit of this series ({this}~2) fixed the config unsetting
issue. Rather than manipulating a local copy of the $recent list (one
cannot know how many entries were removed), simply re-read it.
We must also catch the error when the attempt to remove the second copy
from the re-read list is performed.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
Teach FSCACHE to remember "not found" directories.
This is a performance optimization.
FSCACHE is a performance optimization available for Windows. It
intercepts Posix-style lstat() calls into an in-memory directory
using FindFirst/FindNext. It improves performance on Windows by
catching the first lstat() call in a directory, using FindFirst/
FindNext to read the list of files (and attribute data) for the
entire directory into the cache, and short-cut subsequent lstat()
calls in the same directory. This gives a major performance
boost on Windows.
However, it does not remember "not found" directories. When STATUS
runs and there are missing directories, the lstat() interception
fails to find the parent directory and simply return ENOENT for the
file -- it does not remember that the FindFirst on the directory
failed. Thus subsequent lstat() calls in the same directory, each
re-attempt the FindFirst. This completely defeats any performance
gains.
This can be seen by doing a sparse-checkout on a large repo and
then doing a read-tree to reset the skip-worktree bits and then
running status.
This change reduced status times for my very large repo by 60%.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
_get_recentrepo will fail if duplicate invalid entries are present
in the recentrepo config list. The previous commit fixed the
'git config' limitations in _unset_recentrepo by unsetting all config
entries, however this code would fail on the second attempt to unset it.
Refactor the code to pre-sort and de-duplicate the recentrepo list to
avoid a potential second unset attempt.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
The git gui's recent repo list may become contaminated with duplicate
entries. The git gui would barf when attempting to remove one entry.
Remove them all - there is no option within 'git config' to selectively
remove one of the entries.
This issue was reported on the 'Git User' list
(https://groups.google.com/forum/#!topic/git-users/msev4KsQGFc,
Warning: gui.recentrepo has multiply values while executing).
And also by zosrothko as a Git-for-Windows issue
https://github.com/git-for-windows/git/issues/1014.
On startup the gui checks that entries in the recentrepo list are still
valid repos and deletes thoses that are not. If duplicate entries are
present the 'git config --unset' will barf and this prevents the gui
from starting.
Subsequent patches fix other parts of recentrepo logic used for syncing
internal lists with the external .gitconfig.
Reported-by: Alexey Astakhov <asstv7@gmail.com>
Signed-off-by: Philip Oakley <philipoakley@iee.org>
git-gui tries to temporary set GIT_DIR for starting gitk and restore
it back after they are started. But in case of GIT_DIR which was not set
prior to invocation it is not unset after it. This affects commands
which can be later started from that git gui, for example "Git Bash".
Fix it.
Signed-off-by: Max Kirillov <max@max630.net>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Just like the workaround we added for t9116, t9001.83 hangs sometimes --
but not always! -- when being run in the Git for Windows SDK.
The issue seems to be related to redirection via a pipe, but it is really
hard to diagnose, what with git.exe (a non-MSYS2 program) calling a Perl
script (which is executed by an MSYS2 Perl), piping into another MSYS2
program.
As hunting time is scarce these days, simply work around this for now and
leave the real diagnosis and resolution for later.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, UNC paths are a very convenient way to share data, and
alternates are all about sharing data.
We fixed a bug where alternates specifying UNC paths were not handled
properly, and it is high time that we add a regression test to ensure
that this bug is not reintroduced.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
As of a couple of weeks ago, t9116 hangs sometimes -- but not always! --
when being run in the Git for Windows SDK.
The issue seems to be related to redirection via a pipe, but it is really
hard to diagnose, what with git.exe (a non-MSYS2 program) calling a Perl
script (which is executed by an MSYS2 Perl), piping into another MSYS2
program.
As hunting time is scarce these days, simply work around this for now and
leave the real diagnosis and resolution for later.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This series of branches introduces the git-rebase--helper, a builtin
helping to accelerate the interactive rebase dramatically.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This operation has quadratic complexity, which is especially painful
on Windows, where shell scripts are *already* slow (mainly due to the
overhead of the POSIX emulation layer).
Let's reimplement this with linear complexity (using a hash map to
match the commits' subject lines) for the common case; Sadly, the
fixup/squash feature's design neglected performance considerations,
allowing arbitrary prefixes (read: `fixup! hell` will match the
commit subject `hello world`), which means that we are stuck with
quadratic performance in the worst case.
The reimplemented logic also happens to fix a bug where commented-out
lines (representing empty patches) were dropped by the previous code.
While at it, clarify how the fixup/squash feature works in `git rebase
-i`'s man page.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The `git commit --fixup` command unwraps wrapped onelines when
constructing the commit message, without wrapping the result.
We need to make sure that `git rebase --autosquash` keeps handling such
cases correctly, in particular since we are about to move the autosquash
handling into the rebase--helper.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In particular on Windows, where shell scripts are even more expensive
than on MacOSX or Linux, it makes sense to move a loop that forks
Git at least once for every line in the todo list into a builtin.
Note: The original code did not try to skip unnecessary picks of root
commits but punts instead (probably --root was not considered common
enough of a use case to bother optimizing). We do the same, for now.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In particular on Windows, where shell scripts are even more expensive
than on MacOSX or Linux, it makes sense to move a loop that forks
Git at least once for every line in the todo list into a builtin.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
These tests were a bit anal about the *exact* warning/error message
printed by git rebase. But those messages are intended for the *end
user*, therefore it does not make sense to test so rigidly for the
*exact* wording.
In the following, we will reimplement the missing commits check in
the sequencer, with slightly different words.
So let's just test for the parts in the warning/error message that
we *really* care about, nothing more, nothing less.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This is crucial to improve performance on Windows, as the speed is now
mostly dominated by the SHA-1 transformation (because it spawns a new
rev-parse process for *every* line, and spawning processes is pretty
slow from Git for Windows' MSYS2 Bash).
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
To avoid problems with short SHA-1s that become non-unique during the
rebase, we rewrite the todo script with short/long SHA-1s before and
after letting the user edit the script. Since SHA-1s are not intuitive
for humans, rebase -i also provides the onelines (commit message
subjects) in the script, purely for the user's convenience.
It is very possible to generate a todo script via different means than
rebase -i and then to let rebase -i run with it; In this case, these
onelines are not required.
And this is where the expand/collapse machinery has a bug: it *expects*
that oneline, and failing to find one reuses the previous SHA-1 as
"oneline".
It was most likely an oversight, and made implementation in the (quite
limiting) shell script language less convoluted. However, we are about
to reimplement performance-critical parts in C (and due to spawning a
git.exe process for every single line of the todo script, the
expansion/collapsing of the SHA-1s *is* performance-hampering on
Windows), therefore let's fix this bug to make cross-validation with the
C version of that functionality possible.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The commands used to be indented, and it is nice to look at, but when we
transform the SHA-1s, the indentation is removed. So let's do away with it.
For the moment, at least: when we will use the upcoming rebase--helper
to transform the SHA-1s, we *will* keep the indentation and can
reintroduce it. Yet, to be able to validate the rebase--helper against
the output of the current shell script version, we need to remove the
extra indentation.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The first step of an interactive rebase is to generate the so-called "todo
script", to be stored in the state directory as "git-rebase-todo" and to
be edited by the user.
Originally, we adjusted the output of `git log <options>` using a simple
sed script. Over the course of the years, the code became more
complicated. We now use shell scripting to edit the output of `git log`
conditionally, depending whether to keep "empty" commits (i.e. commits
that do not change any files).
On platforms where shell scripting is not native, this can be a serious
drag. And it opens the door for incompatibilities between platforms when
it comes to shell scripting or to Unix-y commands.
Let's just re-implement the todo script generation in plain C, using the
revision machinery directly.
This is substantially faster, improving the speed relative to the
shell script version of the interactive rebase from 2x to 3x on Windows.
Note that the rearrange_squash() function in git-rebase--interactive
relied on the fact that we set the "format" variable to the config setting
rebase.instructionFormat. Relying on a side effect like this is no good,
hence we explicitly perform that assignment (possibly again) in
rearrange_squash().
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
An upcoming patch will move the todo list generation into the
rebase--helper. An early version of that patch regressed on an empty
rebase.instructionFormat value (the shell version could not discern
between an empty one and a non-existing one, but the C version used the
empty one as if that was intended to skip the oneline from the `pick
<hash>` lines).
Let's verify that this still works as before.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Teach register_rename_src() to see if new file pair
can simply be appended to the rename_src[] array before
performing the binary search to find the proper insertion
point.
This is a performance optimization. This routine is called
during run_diff_files in status and the caller is iterating
over the sorted index, so we should expect to be able to
append in the normal case. The existing insert logic is
preserved so we don't have to assume that, but simply take
advantage of it if possible.
Signed-off-by: Jeff Hostetler <jeffhost@microsoft.com>
If the user has specified '--no-lock-index' when calling git-status, it only seems reasonable that the user intends that option to be carried through to any child forks/procs as well. Currently, the '--no-lock-status' call is lost when submodules are checked. This change places the desired option into the environment, which is in turn passed down to all subsequent children.
With cmd_status checking for '--no-lock--status' first from args then from environment, we're able to keep the option set in all children.
Signed-off-by: J Wyman <jeremy.wyman@microsoft.com>
This fixes the compilation, actually, as we still did not make the jump to
post-Windows XP completely: we still compile with _WIN32_WINNT set to
0x0502 (which corresponds to Windows Server 2003 and is technically
greater than Windows XP's 0x0501).
However, GetTickCount64() is only available starting with Windows
Vista/Windows Server 2008.
Let's just lazy-load the function, which should also help Git for Windows
contributors who want to reinstate Windows XP support.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
From Visual Studio 2015 Code Analysis: Warning C28159 Consider using
'GetTickCount64' instead of 'GetTickCount'.
Reason: GetTickCount overflows roughly every 49 days. Code that does not
take that into account can loop indefinitely. GetTickCount64 operates on
64 bit values and does not have that problem.
Signed-off-by: Steve Hoelzer <shoelzer@gmail.com>
This topic branch teaches the project generator to generate a Visual
Studio solution, ready to be opened in Visual Studio 2010 or later.
The idea, of course, is to let some automatic build job generate and
commit the project files with
make MSVC=1 vcxproj
and then (force-)push to a special-purpose branch.
The major part of this branch thicket concerns itself not only with
generating the Visual Studio project files, but making sure that the
user can then run the test suite from a regular Git Bash (i.e. *not*
requiring a Git for Windows SDK), e.g. by running
cd t
prove --timer --jobs 15 ./t[0-9]*.sh
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch adds the (experimental) --stdin/-z options to `git
reset`. Those patches are still under review in the upstream Git project,
but are already merged in their experimental form into Git for Windows'
`master` branch, in preparation for a MinGit-only release.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch works around an out-of-memory bug when the user
specified a format via --date=format:<format> that strftime() does
not like.
Reported by Stefan Naewe.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
