Add a macro to mark code sections that only read from the file system,
along with a config option and documentation.
This facilitates implementation of relatively simple file system level
caches without the need to synchronize with the file system.
Enable read-only sections for 'git status' and preload_index.
Signed-off-by: Karsten Blees <blees@dcon.de>
Emulating the POSIX lstat API on Windows via GetFileAttributes[Ex] is quite
slow. Windows operating system APIs seem to be much better at scanning the
status of entire directories than checking single files. A caching
implementation may improve performance by bulk-reading entire directories
or reusing data obtained via opendir / readdir.
Make the lstat implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Signed-off-by: Karsten Blees <blees@dcon.de>
Emulating the POSIX dirent API on Windows via FindFirstFile/FindNextFile is
pretty staightforward, however, most of the information provided in the
WIN32_FIND_DATA structure is thrown away in the process. A more
sophisticated implementation may cache this data, e.g. for later reuse in
calls to lstat.
Make the dirent implementation pluggable so that it can be switched at
runtime, e.g. based on a config option.
Define a base DIR structure with pointers to readdir/closedir that match
the opendir implementation (i.e. similar to vtable pointers in OOP).
Define readdir/closedir so that they call the function pointers in the DIR
structure. This allows to choose the opendir implementation on a
call-by-call basis.
Move the fixed sized dirent.d_name buffer to the dirent-specific DIR
structure, as d_name may be implementation specific (e.g. a caching
implementation may just set d_name to point into the cache instead of
copying the entire file name string).
Signed-off-by: Karsten Blees <blees@dcon.de>
Git for Windows ships with its own Perl interpreter, and insists on
using it, so it will most likely wreak havoc if PERL5LIB is set before
launching Git.
Let's just unset that environment variables when spawning processes.
To make this feature extensible (and overrideable), there is a new
config setting `core.unsetenvvars` that allows specifying a
comma-separated list of names to unset before spawning processes.
Reported by Gabriel Fuhrmann.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
In the Git for Windows project, we have ample precendent for config
settings that apply to Windows, and to Windows only.
Let's formalize this concept by introducing a platform_core_config()
function that can be #define'd in a platform-specific manner.
This will allow us to contain platform-specific code better, as the
corresponding variables no longer need to be exported so that they can
be defined in environment.c and be set in config.c
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The code to parse "git -c VAR=VAL cmd" and set configuration
variable for the duration of cmd had two small bugs, which have
been fixed.
This supersedes jc/config-case-cmdline topic that has been discarded.
* jc/config-case-cmdline-take-2:
config: use git_config_parse_key() in git_config_parse_parameter()
config: move a few helper functions up
The code to parse the command line "git grep <patterns>... <rev>
[[--] <pathspec>...]" has been cleaned up, and a handful of bugs
have been fixed (e.g. we used to check "--" if it is a rev).
* jk/grep-no-index-fix:
grep: treat revs the same for --untracked as for --no-index
grep: do not diagnose misspelt revs with --no-index
grep: avoid resolving revision names in --no-index case
grep: fix "--" rev/pathspec disambiguation
grep: re-order rev-parsing loop
grep: do not unnecessarily query repo for "--"
grep: move thread initialization a little lower
"git ls-remote" and "git archive --remote" are designed to work
without being in a directory under Git's control. However, recent
updates revealed that we randomly look into a directory called
.git/ without actually doing necessary set-up when working in a
repository. Stop doing so.
* jn/remote-helpers-with-git-dir:
remote helpers: avoid blind fall-back to ".git" when setting GIT_DIR
remote: avoid reading $GIT_DIR config in non-repo
Code to read submodule.<name>.ignore config did not state the
variable name correctly when giving an error message diagnosing
misconfiguration.
* sb/submodule-config-parse-ignore-fix:
submodule-config: correct error reporting for invalid ignore value
"git push" had a handful of codepaths that could lead to a deadlock
when unexpected error happened, which has been fixed.
* jk/push-deadlock-regression-fix:
send-pack: report signal death of pack-objects
send-pack: read "unpack" status even on pack-objects failure
send-pack: improve unpack-status error messages
send-pack: use skip_prefix for parsing unpack status
send-pack: extract parsing of "unpack" response
receive-pack: fix deadlock when we cannot create tmpdir
Map both old addresses to the new, hopefully more permanent one.
Signed-off-by: Michael J Gruber <git@drmicha.warpmail.net>
Signed-off-by: Michael J Gruber <git@grubix.eu>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
"Cc:" on the trailer part does not have to conform to RFC strictly,
unlike in the e-mail header. "git send-email" has been updated to
ignore anything after '>' when picking addresses, to allow non-address
cruft like " # stable 4.4" after the address.
* jh/send-email-one-cc:
send-email: only allow one address per body tag
The code that parses header fields in the commit object has been
updated for (micro)performance and code hygiene.
* rs/commit-parsing-optim:
commit: don't check for space twice when looking for header
commit: be more precise when searching for headers
"git show-branch" expected there were only very short branch names
in the repository and used a fixed-length buffer to hold them
without checking for overflow.
* jk/show-branch-lift-name-len-limit:
show-branch: use skip_prefix to drop magic numbers
show-branch: store resolved head in heap buffer
show-branch: drop head_len variable
A caller of tempfile API that uses stdio interface to write to
files may ignore errors while writing, which is detected when
tempfile is closed (with a call to ferror()). By that time, the
original errno that may have told us what went wrong is likely to
be long gone and was overwritten by an irrelevant value.
close_tempfile() now resets errno to EIO to make errno at least
predictable.
* jk/tempfile-ferror-fclose-confusion:
tempfile: set errno to a known value before calling ferror()
"git remote rm X", when a branch has remote X configured as the
value of its branch.*.remote, tried to remove branch.*.remote and
branch.*.merge and failed if either is unset.
* rl/remote-allow-missing-branch-name-merge:
remote: ignore failure to remove missing branch.<name>.merge
A "gc.log" file left by a backgrounded "gc --auto" disables further
automatic gc; it has been taught to run at least once a day (by
default) by ignoring a stale "gc.log" file that is too old.
* dt/gc-ignore-old-gc-logs:
gc: ignore old gc.log files
"git upload-pack", which is a counter-part of "git fetch", did not
report a request for a ref that was not advertised as invalid.
This is generally not a problem (because "git fetch" will stop
before making such a request), but is the right thing to do.
* jt/upload-pack-error-report:
upload-pack: report "not our ref" to client
A leak in a codepath to read from a packed object in (rare) cases
has been plugged.
* rs/sha1-file-plug-fallback-base-leak:
sha1_file: release fallback base's memory in unpack_entry()
There is no need for Python only to give a few messages to the
standard error stream, but we somehow did.
* ss/remote-bzr-hg-placeholder-wo-python:
contrib: git-remote-{bzr,hg} placeholders don't need Python
"git diff --quiet" relies on the size field in diff_filespec to be
correctly populated, but diff_populate_filespec() helper function
made an incorrect short-cut when asked only to populate the size
field for paths that need to go through convert_to_git() (e.g. CRLF
conversion).
* jc/diff-populate-filespec-size-only-fix:
diff: do not short-cut CHECK_SIZE_ONLY check in diff_populate_filespec()
"Dumb http" transport used to misparse a nonsense http-alternates
response, which has been fixed.
* jk/http-walker-buffer-underflow-fix:
http-walker: fix buffer underflow processing remote alternates
"git status --porcelain" is supposed to give a stable output, but a
few strings were left as translatable by mistake.
* mg/status-porcelain-no-i18n:
git-status: make porcelain more robust
'git {log,diff,...} -S<...> --pickaxe-regex' can segfault as a result
of out-of-bounds memory reads.
diffcore-pickaxe.c:contains() looks for all matches of the given regex
in a buffer in a loop, advancing the buffer pointer to the end of the
last match in each iteration. When we switched to REG_STARTEND in
b7d36ffca (regex: use regexec_buf(), 2016-09-21), we started passing
the size of that buffer to the regexp engine, too. Unfortunately,
this buffer size is never updated on subsequent iterations, and as the
buffer pointer advances on each iteration, this "bufptr+bufsize"
points past the end of the buffer. This results in segmentation
fault, if that memory can't be accessed. In case of 'git log' it can
also result in erroneously listed commits, if the memory past the end
of buffer is accessible and happens to contain data matching the
regex.
Reduce the buffer size on each iteration as the buffer pointer is
advanced, thus maintaining the correct end of buffer location.
Furthermore, make sure that the buffer pointer is not dereferenced in
the control flow statements when we already reached the end of the
buffer.
The new test is flaky, I've never seen it fail on my Linux box even
without the fix, but this is expected according to db5dfa3 (regex:
-G<pattern> feeds a non NUL-terminated string to regexec() and fails,
2016-09-21). However, it did fail on Travis CI with the first (and
incomplete) version of the fix, and based on that commit message I
would expect the new test without the fix to fail most of the time on
Windows.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com>
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This topic branch allows us to skip the gettext initialization
when the locale directory does not even exist.
This saves 150ms out of 210ms for a simply `git version` call on
Windows, and it most likely will help scripts that call out to
`git.exe` hundreds of times.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The runtime of a simple `git.exe version` call on Windows is currently
dominated by the gettext setup, adding a whopping ~150ms to the ~210ms
total.
Given that this cost is added to each and every git.exe invocation goes
through common-main's invocation of git_setup_gettext(), and given that
scripts have to call git.exe dozens, if not hundreds, of times, this is
a substantial performance penalty.
This is particularly pointless when considering that Git for Windows
ships without localization (to keep the installer's size to a bearable
~34MB): all that time setting up gettext is for naught.
So let's be smart about it and skip setting up gettext if the locale
directory is not even present.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, we simply pass a POSIX path to bindtextdomain(), relying on
the current libintl-8.dll implementation to handle that gracefully by
resolving the path relative to the "root" directory inferred from the
location of the .dll file itself.
However, not only does this rely on the custom patches of the gettext
library as shipped with MSYS2 (gettext's own source code is not prepared
to handle POSIX paths on Windows), it also means that Git itself cannot
use the `podir` variable at all because it does not handle absolute
POSIX paths in system_path() correctly, leaving them as-is.
This patch fixes that behavior by always using a GIT_LOCALE_PATH
relative to the (runtime) prefix.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
On Windows, there is no single root directory. And what Git thinks is a
root directory is not a root directory at all: everything is relative to
the location where Git is installed.
To handle this situation better, let's just allow for GIT_TEXTDOMAINDIR
to be a path relative to the (runtime) prefix.
To that end, we have to switch the order in which common-main handles
argv0 and sets up gettext: in order to have access to the runtime
prefix, we need it to be inferred from argv0 already.
This patch also prepares for GIT_LOCALE_PATH to be relative to prefix,
which is the even more important fix.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
We newly handle isatty() by special-casing the stdin/stdout/stderr file
descriptors, caching the return value. However, we missed the case where
dup2() overrides the respective file descriptor.
That poses a problem e.g. where the `show` builtin asks for a pager very
early, the `setup_pager()` function sets the pager depending on the
return value of `isatty()` and then redirects stdout. Subsequently,
`cmd_log_init_finish()` calls `setup_pager()` *again*. What should
happen now is that `isatty()` reports that stdout is *not* a TTY and
consequently stdout should be left alone.
Let's override dup2() to handle this appropriately.
This fixes https://github.com/git-for-windows/git/issues/1077
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
This does not (yet) resolve the problem that Strg+T with multiple
selected lines fails to (un)stage them all, but it addresses one of
the reported Ctrl+T issues.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
The gui.recentrepo list may be longer than the maxrecent setting.
Allow extra space to show any extra entries.
In an ideal world, the git gui would limit the number of entries
to the maxrecent setting, however the recentrepo config list may
have been extended outwith the gui, or the maxrecent setting changed
to a reduced value. Further, when testing the gui's recentrepo
logic it is useful to show these extra, but valid, entries.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
When the gui/user selects a repo for display, that repo is brought to
the end of the recentrepo config list. The logic can fail if there are
duplicate old entries for the repo (you cannot unset a single config
entry when duplicates are present).
Similarly, the maxrecentrepo logic could fail if older duplicate entries
are present.
The first commit of this series ({this}~2) fixed the config unsetting
issue. Rather than manipulating a local copy of the $recent list (one
cannot know how many entries were removed), simply re-read it.
We must also catch the error when the attempt to remove the second copy
from the re-read list is performed.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
_get_recentrepo will fail if duplicate invalid entries are present
in the recentrepo config list. The previous commit fixed the
'git config' limitations in _unset_recentrepo by unsetting all config
entries, however this code would fail on the second attempt to unset it.
Refactor the code to pre-sort and de-duplicate the recentrepo list to
avoid a potential second unset attempt.
Signed-off-by: Philip Oakley <philipoakley@iee.org>
The git gui's recent repo list may become contaminated with duplicate
entries. The git gui would barf when attempting to remove one entry.
Remove them all - there is no option within 'git config' to selectively
remove one of the entries.
This issue was reported on the 'Git User' list
(https://groups.google.com/forum/#!topic/git-users/msev4KsQGFc,
Warning: gui.recentrepo has multiply values while executing).
And also by zosrothko as a Git-for-Windows issue
https://github.com/git-for-windows/git/issues/1014.
On startup the gui checks that entries in the recentrepo list are still
valid repos and deletes thoses that are not. If duplicate entries are
present the 'git config --unset' will barf and this prevents the gui
from starting.
Subsequent patches fix other parts of recentrepo logic used for syncing
internal lists with the external .gitconfig.
Reported-by: Alexey Astakhov <asstv7@gmail.com>
Signed-off-by: Philip Oakley <philipoakley@iee.org>
