Hans Jerry Illikainen 54887b4689 gpg-interface: add minTrustLevel as a configuration option
Previously, signature verification for merge and pull operations checked
if the key had a trust-level of either TRUST_NEVER or TRUST_UNDEFINED in
verify_merge_signature().  If that was the case, the process die()d.

The other code paths that did signature verification relied entirely on
the return code from check_commit_signature().  And signatures made with
a good key, irregardless of its trust level, was considered valid by
check_commit_signature().

This difference in behavior might induce users to erroneously assume
that the trust level of a key in their keyring is always considered by
Git, even for operations where it is not (e.g. during a verify-commit or
verify-tag).

The way it worked was by gpg-interface.c storing the result from the
key/signature status *and* the lowest-two trust levels in the `result`
member of the signature_check structure (the last of these status lines
that were encountered got written to `result`).  These are documented in
GPG under the subsection `General status codes` and `Key related`,
respectively [1].

The GPG documentation says the following on the TRUST_ status codes [1]:

    """
    These are several similar status codes:

    - TRUST_UNDEFINED <error_token>
    - TRUST_NEVER     <error_token>
    - TRUST_MARGINAL  [0  [<validation_model>]]
    - TRUST_FULLY     [0  [<validation_model>]]
    - TRUST_ULTIMATE  [0  [<validation_model>]]

    For good signatures one of these status lines are emitted to
    indicate the validity of the key used to create the signature.
    The error token values are currently only emitted by gpgsm.
    """

My interpretation is that the trust level is conceptionally different
from the validity of the key and/or signature.  That seems to also have
been the assumption of the old code in check_signature() where a result
of 'G' (as in GOODSIG) and 'U' (as in TRUST_NEVER or TRUST_UNDEFINED)
were both considered a success.

The two cases where a result of 'U' had special meaning were in
verify_merge_signature() (where this caused git to die()) and in
format_commit_one() (where it affected the output of the %G? format
specifier).

I think it makes sense to refactor the processing of TRUST_ status lines
such that users can configure a minimum trust level that is enforced
globally, rather than have individual parts of git (e.g. merge) do it
themselves (except for a grace period with backward compatibility).

I also think it makes sense to not store the trust level in the same
struct member as the key/signature status.  While the presence of a
TRUST_ status code does imply that the signature is good (see the first
paragraph in the included snippet above), as far as I can tell, the
order of the status lines from GPG isn't well-defined; thus it would
seem plausible that the trust level could be overwritten with the
key/signature status if they were stored in the same member of the
signature_check structure.

This patch introduces a new configuration option: gpg.minTrustLevel.  It
consolidates trust-level verification to gpg-interface.c and adds a new
`trust_level` member to the signature_check structure.

Backward-compatibility is maintained by introducing a special case in
verify_merge_signature() such that if no user-configurable
gpg.minTrustLevel is set, then the old behavior of rejecting
TRUST_UNDEFINED and TRUST_NEVER is enforced.  If, on the other hand,
gpg.minTrustLevel is set, then that value overrides the old behavior.

Similarly, the %G? format specifier will continue show 'U' for
signatures made with a key that has a trust level of TRUST_UNDEFINED or
TRUST_NEVER, even though the 'U' character no longer exist in the
`result` member of the signature_check structure.  A new format
specifier, %GT, is also introduced for users that want to show all
possible trust levels for a signature.

Another approach would have been to simply drop the trust-level
requirement in verify_merge_signature().  This would also have made the
behavior consistent with other parts of git that perform signature
verification.  However, requiring a minimum trust level for signing keys
does seem to have a real-world use-case.  For example, the build system
used by the Qubes OS project currently parses the raw output from
verify-tag in order to assert a minimum trust level for keys used to
sign git tags [2].

[1] https://git.gnupg.org/cgi-bin/gitweb.cgi?p=gnupg.git;a=blob;f=doc/doc/DETAILS;h=bd00006e933ac56719b1edd2478ecd79273eae72;hb=refs/heads/master
[2] 9674c1991d/scripts/verify-git-tag (L43)

Signed-off-by: Hans Jerry Illikainen <hji@dyntopia.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2020-01-15 14:06:06 -08:00
2019-12-06 15:09:21 -08:00
2019-12-09 22:17:55 -08:00
2019-12-01 09:04:41 -08:00
2019-11-10 16:00:54 +09:00
2019-12-01 09:04:35 -08:00
2019-12-06 15:09:23 -08:00
2019-09-28 14:04:16 +09:00
2019-11-20 13:29:02 +09:00
2019-10-15 13:48:02 +09:00
2019-08-19 15:04:58 -07:00
2019-10-15 13:48:02 +09:00
2019-11-13 10:09:10 +09:00
2019-12-01 09:04:35 -08:00
2019-10-15 13:48:02 +09:00
2019-12-06 16:31:39 +01:00
2019-12-01 09:04:36 -08:00
2019-12-06 16:31:39 +01:00
2019-11-13 11:48:47 +09:00
2019-12-01 09:04:36 -08:00
2019-11-10 16:00:54 +09:00
2019-09-12 11:03:51 -07:00
2019-12-05 12:52:43 -08:00
2019-11-14 11:10:04 +09:00
2019-10-15 13:48:02 +09:00
2019-11-10 16:00:54 +09:00
2019-12-06 16:31:39 +01:00
2019-12-06 16:31:39 +01:00
2019-12-09 22:17:55 -08:00
2019-12-09 22:17:55 -08:00
2019-12-06 16:31:23 +01:00
2019-12-06 16:31:40 +01:00
2019-10-16 11:11:25 +09:00
2019-11-10 16:00:54 +09:00
2019-12-01 09:04:35 -08:00
2019-08-30 10:22:42 -07:00
2019-11-13 10:09:10 +09:00
2019-12-01 09:04:33 -08:00
2019-08-15 12:37:10 -07:00
2019-12-05 12:52:43 -08:00
2019-10-23 12:05:05 +09:00
2019-12-01 09:04:35 -08:00
2019-10-15 13:48:02 +09:00
2019-12-09 22:17:55 -08:00
2019-12-02 08:48:56 -08:00
2019-09-17 09:39:16 -07:00
2019-10-15 13:48:02 +09:00
2019-12-09 22:17:55 -08:00
2019-10-15 13:48:02 +09:00
2019-12-06 16:31:40 +01:00
2019-11-10 16:00:54 +09:00
2019-09-30 13:19:26 +09:00
2019-10-11 14:24:46 +09:00
2019-11-13 10:09:10 +09:00
2019-10-11 14:24:48 +09:00
2019-12-06 16:31:39 +01:00
2019-12-06 16:31:30 +01:00
2019-12-06 16:31:30 +01:00
2019-09-05 14:10:18 -07:00
2019-08-13 12:21:33 -07:00
2019-12-06 16:31:39 +01:00
2019-12-09 22:17:55 -08:00
2019-09-03 15:10:53 -07:00
2019-12-09 22:17:55 -08:00
2019-11-10 16:00:54 +09:00
2019-10-09 14:01:00 +09:00
2019-10-11 14:24:46 +09:00

Build Status

Git - fast, scalable, distributed revision control system

Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals.

Git is an Open Source project covered by the GNU General Public License version 2 (some parts of it are under different licenses, compatible with the GPLv2). It was originally written by Linus Torvalds with help of a group of hackers around the net.

Please read the file INSTALL for installation instructions.

Many Git online resources are accessible from https://git-scm.com/ including full documentation and Git related tools.

See Documentation/gittutorial.txt to get started, then see Documentation/giteveryday.txt for a useful minimum set of commands, and Documentation/git-<commandname>.txt for documentation of each command. If git has been correctly installed, then the tutorial can also be read with man gittutorial or git help tutorial, and the documentation of each command with man git-<commandname> or git help <commandname>.

CVS users may also want to read Documentation/gitcvs-migration.txt (man gitcvs-migration or git help cvs-migration if git is installed).

The user discussion and development of Git take place on the Git mailing list -- everyone is welcome to post bug reports, feature requests, comments and patches to git@vger.kernel.org (read Documentation/SubmittingPatches for instructions on patch submission). To subscribe to the list, send an email with just "subscribe git" in the body to majordomo@vger.kernel.org. The mailing list archives are available at https://lore.kernel.org/git/, http://marc.info/?l=git and other archival sites.

Issues which are security relevant should be disclosed privately to the Git Security mailing list git-security@googlegroups.com.

The maintainer frequently sends the "What's cooking" reports that list the current status of various development topics to the mailing list. The discussion following them give a good reference for project status, development direction and remaining tasks.

The name "git" was given by Linus Torvalds when he wrote the very first version. He described the tool as "the stupid content tracker" and the name as (depending on your mood):

  • random three-letter combination that is pronounceable, and not actually used by any common UNIX command. The fact that it is a mispronunciation of "get" may or may not be relevant.
  • stupid. contemptible and despicable. simple. Take your pick from the dictionary of slang.
  • "global information tracker": you're in a good mood, and it actually works for you. Angels sing, and a light suddenly fills the room.
  • "goddamn idiotic truckload of sh*t": when it breaks
Description
No description provided
Readme 635 MiB
Languages
C 50.5%
Shell 38.7%
Perl 4.5%
Tcl 3.2%
Python 0.8%
Other 2.1%