Ævar Arnfjörð Bjarmason c6b4888b3f environment.c: remove test-specific "ignore_untracked..." variable
Instead of the global ignore_untracked_cache_config variable added in
dae6c322fa (test-dump-untracked-cache: don't modify the untracked
cache, 2016-01-27) we can make use of the new facility to set config
via environment variables added in d8d77153ea (config: allow
specifying config entries via envvar pairs, 2021-01-12).

It's arguably a bit hacky to use setenv() and getenv() to pass
messages between the same program, but since the test helpers are not
the main intended audience of repo-settings.c I think it's better than
hardcoding the test-only special-case in prepare_repo_settings().

This uses the xsetenv() wrapper added in the preceding commit, if we
don't set these in the environment we'll fail in
t7063-status-untracked-cache.sh, but let's fail earlier anyway if that
were to happen.

This breaks any parent process that's potentially using the
GIT_CONFIG_* and GIT_CONFIG_PARAMETERS mechanism to pass one-shot
config setting down to a git subprocess, but in this case we don't
care about the general case of such potential parents. This process
neither spawns other "git" processes, nor is it interested in other
configuration. We might want to pick up other test modes here, but
those will be passed via GIT_TEST_* environment variables.

Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2021-09-22 13:15:00 -07:00
2021-09-10 11:46:32 -07:00
2021-09-15 13:15:28 -07:00
2021-03-13 16:00:09 -08:00
2021-03-13 16:00:09 -08:00
2021-07-22 13:05:54 -07:00
2021-07-13 16:52:50 -07:00
2021-08-12 14:00:52 -07:00
2021-05-10 16:59:47 +09:00
2021-03-08 09:56:34 -08:00
2021-01-21 15:50:00 -08:00
2021-03-13 16:00:09 -08:00
2021-06-14 10:16:06 +09:00
2021-04-27 16:31:39 +09:00
2021-05-07 12:47:41 +09:00
2021-01-23 17:14:07 -08:00
2021-07-13 16:52:50 -07:00
2021-03-13 16:00:09 -08:00
2021-07-16 17:42:53 -07:00
2021-03-13 16:00:09 -08:00
2021-08-06 12:52:15 -07:00
2021-07-30 12:14:27 -07:00
2021-07-28 13:17:57 -07:00
2021-08-24 15:33:23 -07:00
2021-07-13 16:52:53 -07:00
2021-03-13 16:00:09 -08:00
2021-03-13 16:00:09 -08:00
2021-03-13 16:00:09 -08:00
2021-03-13 16:00:09 -08:00
2021-09-10 11:46:28 -07:00
2021-09-15 13:15:26 -07:00
2021-07-28 13:17:59 -07:00
2021-03-13 16:00:09 -08:00
2021-04-27 16:31:39 +09:00
2021-07-28 13:17:58 -07:00
2021-03-13 16:00:09 -08:00
2021-04-08 13:23:25 -07:00
2021-04-08 13:23:25 -07:00
2021-03-13 16:00:09 -08:00
2021-03-13 16:00:09 -08:00
2021-08-24 15:32:37 -07:00
2021-08-04 13:28:52 -07:00
2021-07-26 12:01:26 -07:00
2021-03-13 16:00:09 -08:00
2021-02-05 16:40:45 -08:00
2020-12-14 10:21:36 -08:00
2021-08-24 15:33:23 -07:00
2021-09-10 11:46:30 -07:00
2021-02-17 17:21:40 -08:00
2021-04-14 13:47:54 -07:00
2021-07-28 13:17:59 -07:00
2021-07-22 13:35:20 -07:00
2021-07-22 13:35:20 -07:00
2021-05-04 12:09:43 +09:00
2021-07-16 17:42:53 -07:00
2021-09-10 11:46:27 -07:00
2021-05-04 11:52:02 +09:00
2021-05-04 11:52:02 +09:00

Build status

Git - fast, scalable, distributed revision control system

Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals.

Git is an Open Source project covered by the GNU General Public License version 2 (some parts of it are under different licenses, compatible with the GPLv2). It was originally written by Linus Torvalds with help of a group of hackers around the net.

Please read the file INSTALL for installation instructions.

Many Git online resources are accessible from https://git-scm.com/ including full documentation and Git related tools.

See Documentation/gittutorial.txt to get started, then see Documentation/giteveryday.txt for a useful minimum set of commands, and Documentation/git-<commandname>.txt for documentation of each command. If git has been correctly installed, then the tutorial can also be read with man gittutorial or git help tutorial, and the documentation of each command with man git-<commandname> or git help <commandname>.

CVS users may also want to read Documentation/gitcvs-migration.txt (man gitcvs-migration or git help cvs-migration if git is installed).

The user discussion and development of Git take place on the Git mailing list -- everyone is welcome to post bug reports, feature requests, comments and patches to git@vger.kernel.org (read Documentation/SubmittingPatches for instructions on patch submission). To subscribe to the list, send an email with just "subscribe git" in the body to majordomo@vger.kernel.org. The mailing list archives are available at https://lore.kernel.org/git/, http://marc.info/?l=git and other archival sites.

Issues which are security relevant should be disclosed privately to the Git Security mailing list git-security@googlegroups.com.

The maintainer frequently sends the "What's cooking" reports that list the current status of various development topics to the mailing list. The discussion following them give a good reference for project status, development direction and remaining tasks.

The name "git" was given by Linus Torvalds when he wrote the very first version. He described the tool as "the stupid content tracker" and the name as (depending on your mood):

  • random three-letter combination that is pronounceable, and not actually used by any common UNIX command. The fact that it is a mispronunciation of "get" may or may not be relevant.
  • stupid. contemptible and despicable. simple. Take your pick from the dictionary of slang.
  • "global information tracker": you're in a good mood, and it actually works for you. Angels sing, and a light suddenly fills the room.
  • "goddamn idiotic truckload of sh*t": when it breaks
Description
No description provided
Readme 694 MiB
Languages
C 50.5%
Shell 38.8%
Perl 4.4%
Tcl 3.2%
Python 0.8%
Other 2.1%