Patrick Steinhardt d857469d85 reftable/reader: introduce refcounting
It was recently reported that concurrent reads and writes may cause the
reftable backend to segfault. The root cause of this is that we do not
properly keep track of reftable readers across reloads.

Suppose that you have a reftable iterator and then decide to reload the
stack while iterating through the iterator. When the stack has been
rewritten since we have created the iterator, then we would end up
discarding a subset of readers that may still be in use by the iterator.
The consequence is that we now try to reference deallocated memory,
which of course segfaults.

One way to trigger this is in t5616, where some background maintenance
jobs have been leaking from one test into another. This leads to stack
traces like the following one:

  + git -c protocol.version=0 -C pc1 fetch --filter=blob:limit=29999 --refetch origin
  AddressSanitizer:DEADLYSIGNAL
  =================================================================
  ==657994==ERROR: AddressSanitizer: SEGV on unknown address 0x7fa0f0ec6089 (pc 0x55f23e52ddf9 bp
0x7ffe7bfa1700 sp 0x7ffe7bfa1700 T0)
  ==657994==The signal is caused by a READ memory access.
      #0 0x55f23e52ddf9 in get_var_int reftable/record.c:29
      #1 0x55f23e53295e in reftable_decode_keylen reftable/record.c:170
      #2 0x55f23e532cc0 in reftable_decode_key reftable/record.c:194
      #3 0x55f23e54e72e in block_iter_next reftable/block.c:398
      #4 0x55f23e5573dc in table_iter_next_in_block reftable/reader.c:240
      #5 0x55f23e5573dc in table_iter_next reftable/reader.c:355
      #6 0x55f23e5573dc in table_iter_next reftable/reader.c:339
      #7 0x55f23e551283 in merged_iter_advance_subiter reftable/merged.c:69
      #8 0x55f23e55169e in merged_iter_next_entry reftable/merged.c:123
      #9 0x55f23e55169e in merged_iter_next_void reftable/merged.c:172
      #10 0x55f23e537625 in reftable_iterator_next_ref reftable/generic.c:175
      #11 0x55f23e2cf9c6 in reftable_ref_iterator_advance refs/reftable-backend.c:464
      #12 0x55f23e2d996e in ref_iterator_advance refs/iterator.c:13
      #13 0x55f23e2d996e in do_for_each_ref_iterator refs/iterator.c:452
      #14 0x55f23dca6767 in get_ref_map builtin/fetch.c:623
      #15 0x55f23dca6767 in do_fetch builtin/fetch.c:1659
      #16 0x55f23dca6767 in fetch_one builtin/fetch.c:2133
      #17 0x55f23dca6767 in cmd_fetch builtin/fetch.c:2432
      #18 0x55f23dba7764 in run_builtin git.c:484
      #19 0x55f23dba7764 in handle_builtin git.c:741
      #20 0x55f23dbab61e in run_argv git.c:805
      #21 0x55f23dbab61e in cmd_main git.c:1000
      #22 0x55f23dba4781 in main common-main.c:64
      #23 0x7fa0f063fc89 in __libc_start_call_main ../sysdeps/nptl/libc_start_call_main.h:58
      #24 0x7fa0f063fd44 in __libc_start_main_impl ../csu/libc-start.c:360
      #25 0x55f23dba6ad0 in _start (git+0xadfad0) (BuildId: 803b2b7f59beb03d7849fb8294a8e2145dd4aa27)

While it is somewhat awkward that the maintenance processes survive
tests in the first place, it is totally expected that reftables should
work alright with concurrent writers. Seemingly they don't.

The only underlying resource that we need to care about in this context
is the reftable reader, which is responsible for reading a single table
from disk. These readers get discarded immediately (unless reused) when
calling `reftable_stack_reload()`, which is wrong. We can only close
them once we know that there are no iterators using them anymore.

Prepare for a fix by converting the reftable readers to be refcounted.

Reported-by: Jeff King <peff@peff.net>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
2024-08-23 08:04:47 -07:00
2024-08-08 10:41:21 -07:00
2024-07-12 14:32:52 -07:00
2024-08-08 10:41:21 -07:00
2024-05-24 11:40:44 -07:00
2024-07-02 09:59:00 -07:00
2023-11-26 10:07:06 +09:00
2024-08-23 08:04:47 -07:00
2024-08-08 10:41:18 -07:00
2024-05-27 11:20:00 -07:00
2024-07-08 14:53:10 -07:00
2024-07-08 14:53:10 -07:00
2024-07-02 09:59:00 -07:00
2024-06-17 15:55:55 -07:00
2024-07-08 14:53:10 -07:00
2023-12-26 12:04:32 -08:00
2024-07-08 14:53:10 -07:00
2024-07-08 14:53:11 -07:00
2024-06-14 10:26:33 -07:00
2024-06-14 10:26:33 -07:00
2024-01-23 10:40:10 -08:00
2024-06-14 10:26:33 -07:00
2024-07-08 14:53:10 -07:00
2024-07-08 14:53:10 -07:00
2024-07-08 14:53:10 -07:00
2024-06-04 15:07:08 -07:00
2024-06-14 10:26:33 -07:00
2024-06-14 10:26:33 -07:00
2024-04-05 15:21:14 -07:00
2024-07-08 14:53:10 -07:00
2024-07-08 14:53:10 -07:00
2024-06-14 10:26:33 -07:00
2024-06-14 10:26:33 -07:00
2024-07-02 09:59:00 -07:00
2024-07-02 09:59:00 -07:00
2024-06-17 15:55:58 -07:00
2023-11-26 10:07:05 +09:00
2024-07-31 13:34:21 -07:00
2023-11-26 10:07:05 +09:00
2023-06-28 14:06:39 -07:00
2024-06-14 10:26:33 -07:00
2024-07-08 14:53:10 -07:00
2024-07-17 10:47:26 -07:00
2023-06-28 14:06:39 -07:00
2024-04-19 12:38:50 +02:00
2023-11-26 10:07:05 +09:00
2023-11-26 10:07:05 +09:00
2023-11-26 10:07:05 +09:00
2023-11-26 10:07:05 +09:00
2024-06-14 10:26:33 -07:00
2024-07-02 09:59:00 -07:00
2024-08-22 07:59:48 -07:00
2024-07-08 14:53:10 -07:00
2024-02-26 15:34:01 -08:00
2024-02-26 15:34:01 -08:00
2024-07-08 14:53:10 -07:00
2024-07-08 14:53:10 -07:00
2024-07-08 14:53:10 -07:00
2024-06-11 13:15:05 -07:00
2024-07-08 14:53:10 -07:00
2024-07-08 14:53:10 -07:00
2024-06-14 10:26:33 -07:00
2024-06-14 10:26:33 -07:00
2024-06-14 10:26:33 -07:00
2024-07-25 09:03:00 -07:00
2024-07-25 09:03:00 -07:00
2024-05-24 11:40:42 -07:00
2024-05-24 11:40:42 -07:00
2024-06-24 16:39:15 -07:00
2024-07-02 09:59:00 -07:00
2023-11-26 10:07:05 +09:00
2024-06-14 10:26:33 -07:00
2024-05-11 17:22:17 +02:00
2024-04-05 15:21:14 -07:00
2024-07-02 09:59:00 -07:00
2024-07-31 13:34:21 -07:00
2024-07-02 09:59:01 -07:00
2024-07-02 09:59:01 -07:00
2024-07-02 09:59:01 -07:00
2024-07-08 14:53:10 -07:00
2024-07-08 14:53:10 -07:00
2024-06-14 10:26:33 -07:00
2024-06-14 10:26:33 -07:00
2024-07-08 14:53:10 -07:00
2024-07-02 09:59:00 -07:00
2024-06-14 10:26:33 -07:00
2024-07-02 09:59:00 -07:00
2023-11-26 10:07:05 +09:00
2024-03-02 11:12:16 -08:00
2024-06-14 10:26:33 -07:00
2023-12-27 14:52:24 -08:00
2023-09-15 17:08:46 -07:00
2024-06-12 13:37:15 -07:00
2024-04-19 12:38:37 +02:00
2024-05-17 10:33:39 -07:00
2023-11-26 10:07:05 +09:00
2024-05-23 11:04:27 -07:00
2024-07-08 14:53:11 -07:00
2024-06-14 10:26:33 -07:00
2024-06-14 10:26:33 -07:00
2023-06-28 14:06:39 -07:00
2024-04-05 15:16:27 -07:00
2023-11-26 10:07:05 +09:00
2023-11-26 10:07:05 +09:00
2024-06-24 16:39:15 -07:00
2023-05-17 10:11:41 -07:00
2024-06-14 10:26:33 -07:00

Build status

Git - fast, scalable, distributed revision control system

Git is a fast, scalable, distributed revision control system with an unusually rich command set that provides both high-level operations and full access to internals.

Git is an Open Source project covered by the GNU General Public License version 2 (some parts of it are under different licenses, compatible with the GPLv2). It was originally written by Linus Torvalds with help of a group of hackers around the net.

Please read the file INSTALL for installation instructions.

Many Git online resources are accessible from https://git-scm.com/ including full documentation and Git related tools.

See Documentation/gittutorial.txt to get started, then see Documentation/giteveryday.txt for a useful minimum set of commands, and Documentation/git-<commandname>.txt for documentation of each command. If git has been correctly installed, then the tutorial can also be read with man gittutorial or git help tutorial, and the documentation of each command with man git-<commandname> or git help <commandname>.

CVS users may also want to read Documentation/gitcvs-migration.txt (man gitcvs-migration or git help cvs-migration if git is installed).

The user discussion and development of Git take place on the Git mailing list -- everyone is welcome to post bug reports, feature requests, comments and patches to git@vger.kernel.org (read Documentation/SubmittingPatches for instructions on patch submission and Documentation/CodingGuidelines).

Those wishing to help with error message, usage and informational message string translations (localization l10) should see po/README.md (a po file is a Portable Object file that holds the translations).

To subscribe to the list, send an email to git+subscribe@vger.kernel.org (see https://subspace.kernel.org/subscribing.html for details). The mailing list archives are available at https://lore.kernel.org/git/, https://marc.info/?l=git and other archival sites.

Issues which are security relevant should be disclosed privately to the Git Security mailing list git-security@googlegroups.com.

The maintainer frequently sends the "What's cooking" reports that list the current status of various development topics to the mailing list. The discussion following them give a good reference for project status, development direction and remaining tasks.

The name "git" was given by Linus Torvalds when he wrote the very first version. He described the tool as "the stupid content tracker" and the name as (depending on your mood):

  • random three-letter combination that is pronounceable, and not actually used by any common UNIX command. The fact that it is a mispronunciation of "get" may or may not be relevant.
  • stupid. contemptible and despicable. simple. Take your pick from the dictionary of slang.
  • "global information tracker": you're in a good mood, and it actually works for you. Angels sing, and a light suddenly fills the room.
  • "goddamn idiotic truckload of sh*t": when it breaks
Description
No description provided
Readme 742 MiB
Languages
C 50.4%
Shell 38.7%
Perl 4.4%
Tcl 3.1%
Python 0.8%
Other 2.4%