We mmap() a loose object file, storing the result in the local variable
"mapped", which is eventually assigned into our stream struct as
"st.mapped". If we hit an error, we jump to an error label which does:
munmap(st.mapped, st.mapsize);
to clean up. But this is wrong; we don't assign st.mapped until the end
of the function, after all of the "goto error" jumps. So this munmap()
is never cleaning up anything (st.mapped is always NULL, because we
initialize the struct with calloc).
Instead, we should feed the local variable to munmap().
This leak is due to 595296e124 (streaming: allocate stream inside the
backend-specific logic, 2025-11-23), which introduced the local
variable. Before that, we assigned the mmap result directly into
st.mapped. It was probably switched there so that we do not have to
allocate/free the struct when the map operation fails (e.g., because we
don't have the loose object). Before that commit, the struct was passed
in from the caller, so there was no allocation at all.
You can see the leak in the test suite by building with:
make SANITIZE=leak NO_MMAP=1 CC=clang
and running t1060. We need NO_MMAP so that the mmap() is backed by an
actual malloc(), which allows LSan to detect it. And the leak seems not
to be detected when compiling with gcc, probably due to some internal
compiler decisions about how the stack memory is written.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The usual entry point for loading the pack revindex is the
load_pack_revindex() function. It returns immediately if the packed_git
has a non-NULL revindex or revindex data field (representing an
in-memory or mmap'd .rev file, respectively), since the data is already
loaded.
But in 5a6072f631 (fsck: validate .rev file header, 2023-04-17) the fsck
code path switched to calling load_pack_revindex_from_disk() directly,
since it wants to check the on-disk data (if there is any). But that
function does _not_ check to see if the data has already been loaded; it
just maps the file, overwriting the revindex_map pointer (and pointing
revindex_data inside that map). And in that case we've leaked the mmap()
pointed to by revindex_map (if it was non-NULL).
This usually doesn't happen, since fsck wouldn't need to load the
revindex for any reason before we get to these checks. But there are
some cases where it does. For example, is_promisor_object() runs
odb_for_each_object() with the PACK_ORDER flag, which uses the revindex.
This happens a few times in our test suite, but SANITIZE=leak doesn't
detect it because we are leaking an mmap(), not a heap-allocated buffer
from malloc(). However, if you build with NO_MMAP, then our compat mmap
will read into a heap buffer instead, and LSan will complain. This
causes failures in t5601, t0410, t5702, and t5616.
We can fix it by checking for existing revindex_data when loading from
disk. This is redundant when we're called from load_pack_revindex(), but
it's a cheap check. The alternative is to teach check_pack_rev_indexes()
in fsck to skip the load, but that seems messier; it doesn't otherwise
know about internals like revindex_map and revindex_data.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Since c6807a40dc (clone: open a shortcut for connectivity check,
2013-05-26), we may open a one-off packed_git struct to check what's in
the pack we just received. At the end of the function we throw away the
struct (rather than linking it into the repository struct as usual).
We used to leak the struct until dd4143e7bf (connected.c: free the
"struct packed_git", 2022-11-08), which calls free(). But that's not
sufficient; inside the struct we'll have mmap'd the pack idx data from
disk, which needs an munmap() call.
Building with SANITIZE=leak doesn't detect this, because we are leaking
our own mmap(), and it only finds heap allocations from malloc(). But if
we use our compat mmap implementation like this:
make NO_MMAP=MapsBecomeMallocs SANITIZE=leak
then LSan will notice the leak, because now it's a regular heap buffer
allocated by malloc().
We can fix it by calling close_pack(), which will free any associated
memory. Note that we need to check for NULL ourselves; unlike free(), it
is not safe to pass a NULL pointer to close_pack().
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In check_connected(), if the transport tells us we got a single packfile
that has already been verified as self-contained and connected, then we
can skip checking connectivity for any tips that are mentioned in that
pack. This goes back to c6807a40dc (clone: open a shortcut for
connectivity check, 2013-05-26).
We don't need to open that pack until we are about to start sending oids
to our child rev-list process, since that's when we check whether they
are in the self-contained pack. Let's push the opening of that pack
further down in the function. That saves us from having to clean it up
when we leave the function early (and by the time have opened the
rev-list process, we never leave the function early, since we have to
clean up the child process).
Signed-off-by: Jeff King <peff@peff.net>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
* 'jx/zh_CN' of github.com:jiangxin/git:
l10n: zh_CN: standardize glossary terms
l10n: zh_CN: updated translation for 2.53
l10n: zh_CN: fix inconsistent use of standard vs. wide colons
Add preferred Chinese terminology notes and align existing translations
to the updated glossary. AI-assisted review was used to check and
improve legacy translations.
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
Replace mixed usage of standard (ASCII) colons ':' with full-width
(wide) colons '：' in Chinese translations to ensure typographic
consistency, as reported by CAESIUS-TIM [1].
Full-width punctuation is preferred in Chinese localization for better
readability and adherence to typesetting conventions.
[1]: https://github.com/git-l10n/git-po/issues/884
Signed-off-by: Jiang Xin <worldhello.net@gmail.com>
* 'master' of https://github.com/j6t/git-gui:
git-gui: mark *.po files at any directory level as UTF-8
git-gui i18n: Update Bulgarian translation (558t)
git-gui i18n: Update Bulgarian translation (557t)
When a commit is viewed in Gitk that changes a file in po/glossary, the
patch text shows mojibake instead of correctly decoded UTF-8 text.
Gitk retrieves the encoding attribute to decide how to treat the bytes
that make up the patch text. There is an attribute definition that all
files are US-ASCII, and a later attribute definition overrides this.
But the override, which specifies UTF-8, applies only to *.po files in
directory po/ and does not apply to subdirectories.
Widen the pattern to apply to all directory levels.
Signed-off-by: Johannes Sixt <j6t@kdbg.org>
- Translate new string (558t)
- Add graves for disambiguation
- Improve glossary translation (96t) and synchonize with git
Signed-off-by: Alexander Shopov <ash@kambanaria.org>
Upstream symbolic link support on Windows from Git-for-Windows.
* js/symlink-windows:
mingw: special-case index entries for symlinks with buggy size
mingw: emulate `stat()` a little more faithfully
mingw: try to create symlinks without elevated permissions
mingw: add support for symlinks to directories
mingw: implement basic `symlink()` functionality (file symlinks only)
mingw: implement `readlink()`
mingw: allow `mingw_chdir()` to change to symlink-resolved directories
mingw: support renaming symlinks
mingw: handle symlinks to directories in `mingw_unlink()`
mingw: add symlink-specific error codes
mingw: change default of `core.symlinks` to false
mingw: factor out the retry logic
mingw: compute the correct size for symlinks in `mingw_lstat()`
mingw: teach dirent about symlinks
mingw: let `mingw_lstat()` error early upon problems with reparse points
mingw: drop the separate `do_lstat()` function
mingw: implement `stat()` with symlink support
mingw: don't call `GetFileAttributes()` twice in `mingw_lstat()`
Dscho observed that SVN tests are taking too much time in CI leak
checking tasks, but most time is spent not in our code but in libsvn
code (which happen to be written in Perl), whose leaks have little
value to discover for us. Skip SVN, P4, and CVS tests in the leak
checking tasks.
* js/ci-leak-skip-svn:
ci: skip CVS and P4 tests in leaks job, too
ci(*-leaks): skip the git-svn tests to save time
"git bugreport" and "git version --build-options" learned to
include use of 'gettext' feature, to make it easier to diagnose
problems around l10n.
* jx/build-options-gettext:
help: report on whether or not gettext is enabled
Remove implicit reliance on the_repository global in the APIs
around tree objects and make it explicit which repository to work
in.
* rs/tree-wo-the-repository:
cocci: remove obsolete the_repository rules
cocci: convert parse_tree functions to repo_ variants
tree: stop using the_repository
tree: use repo_parse_tree()
path-walk: use repo_parse_tree_gently()
pack-bitmap-write: use repo_parse_tree()
delta-islands: use repo_parse_tree()
bloom: use repo_parse_tree()
add-interactive: use repo_parse_tree_indirect()
tree: add repo_parse_tree*()
environment: move access to core.maxTreeDepth into repo settings
The logic that avoids reusing MIDX files with a wrong checksum was
broken, which has been corrected.
* tb/midx-write-corrupt-checksum-fix:
midx-write.c: assume checksum-invalid MIDXs require an update
t/t5319-multi-pack-index.sh: drop early 'test_done'
