We truncate the .bitmap file to 512 bytes and expect to run into
problems reading an individual ewah file. But this length is somewhat
arbitrary, and just happened to work when the test was added in
9d2e330b17 (ewah_read_mmap: bounds-check mmap reads, 2018-06-14).
An upcoming commit will change the size of the history we create in the
test repo, which will cause this test to fail. We can future-proof it a
bit more by reducing the size of the truncated bitmap file.
Signed-off-by: Jeff King <peff@peff.net>
Helped-by: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A .bitmap file may have a "name hash cache" extension, which puts a
sequence of uint32_t values (one per object) at the end of the file.
When we see a flag indicating this extension, we blindly subtract the
appropriate number of bytes from our available length. However, if the
.bitmap file is too short, we'll underflow our length variable and wrap
around, thinking we have a very large length. This can lead to reading
out-of-bounds bytes while loading individual ewah bitmaps.
We can fix this by checking the number of available bytes when we parse
the header. The existing "truncated bitmap" test is now split into two
tests: one where we don't have this extension at all (and hence actually
do try to read a truncated ewah bitmap) and one where we realize
up-front that we can't even fit in the cache structure. We'll check
stderr in each case to make sure we hit the error we're expecting.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To allow us to consider a change in the default behavior of `git init`
where it uses a more inclusive name for the initial branch, we must
first teach the test suite not to rely on a specific default branch
name. In this patch, we teach t7064 that trick.
To that end, we set a specific name for the initial branch. Ideally, we
would simply start out by calling `git branch -M initial-branch`, but
there is a bug in `git branch -M` that does not allow renaming branches
unless they already have commits. This will be fixed in the
`js/init-defaultbranch-advice` topic, and until that time, we use the
equivalent (but less intuitive) `git checkout -f --orphan`.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Git diff reports a submodule directory as -dirty even when there are
only untracked files in the submodule directory. This is inconsistent
with what `git describe --dirty` says when run in the submodule
directory in that state.
Make `--ignore-submodules=untracked` the default for `git diff` when
there is no configuration variable or command line option, so that the
command would not give '-dirty' suffix to a submodule whose working
tree has untracked files, to make it consistent with `git
describe --dirty` that is run in the submodule working tree.
And also make `--ignore-submodules=none` the default for `git status`
so that the user doesn't end up deleting a submodule that has
uncommitted (untracked) files.
Signed-off-by: Sangeeta Jain <sangunb09@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our test suite currently only passes when `git init` uses the name
`master` for the initial branch. This would stop us from changing the
default branch name.
Let's adjust t6300 so that it does not rely on any specific default
branch name. This trick is done by (force-)renaming the initial branch
to the name `main` in the `setup` and the `:remotename and :remoteref`
test cases, and then replacing all mentions of `master` and `MASTER`
with `main` and `MAIN`, respectively.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Split a very long line in a test introduced in 0b691d8685 (pretty:
add support for separator option in %(trailers), 2019-01-28). This
makes it easier to read, especially as follow-up commits will copy
this test as a template.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Our tests for handling duplicates in oid-array provide only a single
duplicate for each number, so our sorted array looks like:
44 44 55 55 88 88 aa aa
A slightly more interesting test is to have multiple duplicates, which
makes sure that we not only skip the duplicate, but keep skipping until
we are out of the set of matching duplicates.
Unsurprisingly this works just fine, but it's worth beefing up this test
since we're about to change the duplicate-detection code.
Note that we do need to adjust the results on the lookup test, since it
is returning the index of the found item (and now we have more items
before our range, and the range itself is slightly larger, since we'll
accept a match of any element).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The data type is an oid_array these days, and we are using "test-tool
oid-array", so let's name the test script appropriately.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Initially, we started converting this test script in anticipation for
renaming the default branch name to `main`. To that end, we partially
converted it to accommodate for that default branch name, marking the
now-failing test cases with a prereq that was designed to be fulfilled
once the rename was complete.
However, the effort to move to the branch name `main` needs quite a bit
longer, as it was decided that we need a deprecation phase first.
To avoid keeping t5526 in limbo for such a long time, we just made it
independent of the actual default branch name used by Git. Therefore,
that prereq is no longer necessary, and we can drop it.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While at it, use different default branch names for the three different
repositories involved in the test script: this makes it easier to debug
failures, too (otherwise you have to wonder which `master` branch was
meant: the super project's? The submodule's? The nested submodule's?).
Note: this touches code that was originally modified to prepare for
renaming the default branch name to `main`. This patch side-steps that
effort completely by overriding the initial branch name explicitly.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
To keep track of which object filters are allowed or not, 'git
upload-pack' stores the name of each filter in a string_list, and sets
it ->util pointer to be either 0 or 1, indicating whether it is banned
or allowed.
Later on, we attempt to clear that list, but we incorrectly ask for the
util pointers to be free()'d, too. This behavior (introduced back in
6dd3456a8c (upload-pack.c: allow banning certain object filter(s),
2020-08-03)) leads to an invalid free, and causes us to crash.
In order to trigger this, one needs to fetch from a server that (a) has
at least one object filter allowed, and (b) issue a fetch that contains
a subset of the allowed filters (i.e., we cannot ask for a banned
filter, since this causes us to die() before we hit the bogus
string_list_clear()).
In that case, whatever banned filters exist will cause a noop free()
(since those ->util pointers are set to 0), but the first allowed filter
we try to free will crash us.
We never noticed this in the tests because we didn't have an example of
setting 'uploadPackFilter' configuration variables and then following up
with a valid fetch. The first new 'git clone' prevents further
regression here. For good measure on top, add a test which checks the
same behavior at a tree depth greater than 0.
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
If we encounter an error in parse_filter_object_config(), we'll complain
to stderr but won't actually propagate the return value up the stack.
This is unlike most of our config callbacks, which return the error to
git_config() so it can die (this includes the call just below us to
parse_hide_refs_config(), which can also produce errors).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
An earlier attempt to fix "git fetch --recurse-submodules" broke
another use case; revert it until a better fix is found.
* pk/subsub-fetch-fix:
Revert "submodules: fix of regression on fetching of non-init subsub-repo"
"git pull --rebase --recurse-submodules" checked for local changes
in a wrong range and failed to run correctly when it should.
* pb/pull-rebase-recurse-submodules:
pull: check for local submodule modifications with the right range
t5572: describe '--rebase' tests a little more
t5572: add notes on a peculiar test
pull --rebase: compute rebase arguments in separate function
This reverts commit 1b7ac4e6d4d490b224f5206af7418ed74e490608; in
<CAN0XMOLiS_8JZKF_wW70BvRRxkDHyUoa=Z3ODtB_Bd6f5Y=7JQ@mail.gmail.com>,
Ralf Thielow reports that "git fetch" with submodule.recurse set can
result in a bogus and infinitely recursive fetching of the same
submodule.
core.sharedRepository defines which permissions Git should set when
creating files in $GIT_DIR, so that the repository may be shared with
other users. But (in its current form) the setting shouldn't affect how
files are created in the working tree. This is not respected by apply
and am (which uses apply), when creating leading directories:
$ cat d.patch
diff --git a/d/f b/d/f
new file mode 100644
index 0000000..e69de29
Apply without the setting:
$ umask 0077
$ git apply d.patch
$ ls -ld d
drwx------
Apply with the setting:
$ umask 0077
$ git -c core.sharedRepository=0770 apply d.patch
$ ls -ld d
drwxrws---
Only the leading directories are affected. That's because they are
created with safe_create_leading_directories(), which calls
adjust_shared_perm() to set the directories' permissions based on
core.sharedRepository. To fix that, let's introduce a variant of this
function that ignores the setting, and use it in apply. Also add a
regression test and a note in the function documentation about the use
of each variant according to the destination (working tree or git
dir).
Signed-off-by: Matheus Tavares <matheus.bernardino@usp.br>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test marked with EXPENSIVE creates two 2.5GB files and adds them to
the repository. This takes 194s to run on my machine, versus 2s when the
EXPENSIVE prereq isn't set. We can trim this down a bit by doing two
things:
- use "git commit --quiet" to avoid spending time generating a diff
summary (this actually only helps for the second commit, but I've
added it here to both for consistency). This shaves off 8s.
- set core.compression to 0. We know these files are full of random
bytes, and so won't compress (that's the point of the test!).
Spending cycles on zlib is pointless. This shaves off 122s.
After this, my total time to run the script is 64s. That won't help
normal runs without GIT_TEST_LONG set, of course, but it's easy enough
to do.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
sparse-checkouts are built on the patterns in the
$GIT_DIR/info/sparse-checkout file, where commands have modified
behavior for paths that do not match those patterns. The differences in
behavior, as far as the bugs concerned here, fall into three different
categories (with git subcommands that fall into each category listed):
* commands that only look at files matching the patterns:
* status
* diff
* clean
* update-index
* commands that remove files from the working tree that do not match
the patterns, and restore files that do match them:
* read-tree
* switch
* checkout
* reset (--hard)
* commands that omit writing files to the working tree that do not
match the patterns, unless those files are not clean:
* merge
* rebase
* cherry-pick
* revert
There are some caveats above, e.g. a plain `git diff` ignores files
outside the sparsity patterns but will show diffs for paths outside the
sparsity patterns when revision arguments are passed. (Technically,
diff is treating the sparse paths as matching HEAD.) So, there is some
internal inconsistency among these commands. There are also additional
commands that should behave differently in the face of sparse-checkouts,
as the sparse-checkout documentation alludes to, but the above is
sufficient for me to explain how `git stash` is affected.
What is relevant here is that logically 'stash' should behave like a
merge; it three-way merges the changes the user had in progress at stash
creation time, the HEAD at the time the stash was created, and the
current HEAD, in order to get the stashed changes applied to the current
branch. However, this simplistic view doesn't quite work in practice,
because stash tweaks it a bit due to two factors: (1) flags like
--keep-index and --include-untracked (why we used two different verbs,
'keep' and 'include', is a rant for another day) modify what should be
staged at the end and include more things that should be quasi-merged,
(2) stash generally wants changes to NOT be staged. It only provides
exceptions when (a) some of the changes had conflicts and thus we want
to use stages to denote the clean merges and higher order stages to
mark the conflicts, or (b) if there is a brand new file we don't want
it to become untracked.
stash has traditionally gotten this special behavior by first doing a
merge, and then when it's clean, applying a pipeline of commands to
modify the result. This series of commands for
unstaging-non-newly-added-files came from the following commands:
git diff-index --cached --name-only --diff-filter=A $CTREE >"$a"
git read-tree --reset $CTREE
git update-index --add --stdin <"$a"
rm -f "$a"
Looking back at the different types of special sparsity handling listed
at the beginning of this message, you may note that we have at least one
of each type covered here: merge, diff-index, and read-tree. The weird
mix-and-match led to 3 different bugs:
(1) If a path merged cleanly and it didn't match the sparsity patterns,
the merge backend would know to avoid writing it to the working tree and
keep the SKIP_WORKTREE bit, simply only updating it in the index.
Unfortunately, the subsequent commands would essentially undo the
changes in the index and thus simply toss the changes altogether since
there was nothing left in the working tree. This means the stash is
only partially applied.
(2) If a path existed in the worktree before `git stash apply` despite
having the SKIP_WORKTREE bit set, then the `git read-tree --reset` would
print an error message of the form
error: Entry 'modified' not uptodate. Cannot merge.
and cause stash to abort early.
(3) If there was a brand new file added by the stash, then the
diff-index command would save that pathname to the temporary file, the
read-tree --reset would remove it from the index, and the update-index
command would barf due to no such file being present in the working
copy; it would print a message of the form:
error: NEWFILE: does not exist and --remove not passed
fatal: Unable to process path NEWFILE
and then cause stash to abort early.
Basically, the whole idea of unstage-unless-brand-new requires special
care when you are dealing with a sparse-checkout. Fix these problems
by applying the following simple rule:
When we unstage files, if they have the SKIP_WORKTREE bit set,
clear that bit and write the file out to the working directory.
(*) If there's already a file present in the way, rename it first.
This fixes all three problems in t7012.13 and allows us to mark it as
passing.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When stash was converted from shell to a builtin, it merely
transliterated the forking of various git commands from shell to a C
program that would fork the same commands. Some of those were converted
over to actual library calls, but much of the pipeline-of-commands
design still remains. Fix some of this by replacing the portion
corresponding to
git diff-index --cached --name-only --diff-filter=A $CTREE >"$a"
git read-tree --reset $CTREE
git update-index --add --stdin <"$a"
rm -f "$a"
into a library function that does the same thing. (The read-tree
--reset was already partially converted over to a library call, but as
an independent piece.) Note here that this came after a merge operation
was performed. The merge machinery always stages anything that cleanly
merges, and the above code only runs if there are no conflicts. Its
purpose is to make it so that when there are no conflicts, all the
changes from the stash are unstaged. However, that causes brand new
files from the stash to become untracked, so the code above first saves
those files off and then re-adds them afterwards.
We replace the whole series of commands with a simple function that will
unstage files that are not newly added. This doesn't fix any bugs in
the usage of these commands, it simply matches the existing behavior but
makes it into a single atomic operation that we can then operate on as a
whole. A subsequent commit will take advantage of this to fix issues
with these commands in sparse-checkouts.
This conversion incidentally fixes t3906.1, because the separate
update-index process would die with the following error messages:
error: uninitialized_sub: is a directory - add files inside instead
fatal: Unable to process path uninitialized_sub
The unstaging of the directory as a submodule meant it was no longer
tracked, and thus as an uninitialized directory it could not be added
back using `git update-index --add`, thus resulting in this error and
early abort. Most of the submodule tests in 3906 continue to fail after
this change, this change was just enough to push the first of those
tests to success.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Applying stashes in sparse-checkouts, particularly when the patterns
used to define the sparseness have changed between when the stash was
created and when it is applied, has a number of bugs. The primary
problem is that stashes are sometimes only partially applied. In most
such cases, it does so silently without any warning or error being
displayed and with 0 exit status.
There are, however, a few cases when non-translated error messages are
shown and the stash application aborts early. The first is when there
are files present despite the SKIP_WORKTREE bit being set, in which case
the error message shown is:
error: Entry 'PATHNAME' not uptodate. Cannot merge.
The other situation is when a stash contains new files to add to the
working tree; in this case, the code aborts early but still has the
stash partially applied, and shows the following error message:
error: NEWFILE: does not exist and --remove not passed
fatal: Unable to process path NEWFILE
Add a test that can trigger all three of these problems. Have it
carefully check that the working copy and SKIP_WORKTREE bits are as
expected after the stash application. The test is currently marked as
expected to fail, but subsequent commits will implement the fixes and
toggle the expectation.
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A test script got cleaned up and then made not to depend on the
value of init.defaultBranch.
* js/t3404-master-to-primary:
t3404: do not depend on any specific default branch name
Config parser fix for "git notes".
* na/notes-displayref-is-not-boolean:
t3301: test proper exit response to no-value notes.displayRef.
notes.c: fix a segfault in notes_display_config()
A test script got cleaned up not to depend on the value of
init.defaultBranch.
* js/t4015-wo-master:
t4015: let the test pass with any default branch name
A test script got cleaned up and then made not to depend on the
value of init.defaultBranch.
* js/t2106-cleanup:
t2106: ensure that the checkout fails for the expected reason
t2106: make test independent of the current main branch name
t2106: adjust style to the current conventions
Since commit 9ba89f484e git learned how to push to a remote branch using
the source @, for example:
git push origin @:master
However, if the right-hand side is missing, the push fails:
git push origin @
It is obvious what is the desired behavior, and allowing the push makes
things more consistent.
Additionally, @:master now has the same semantics as HEAD:master.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
So that we are not left in an inconsistent state between them.
Signed-off-by: Felipe Contreras <felipe.contreras@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Simplify test and make error messages more clear here.
Per feedback from Junio in
33226af42b (t/perf/fsmonitor: improve error message if typoing hook
name, 2020-10-26)
Signed-off-by: Nipunn Koorapati <nipunn@dropbox.com>
Acked-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The "git maintenance run" and "git maintenance start/stop" commands
holds a file-based lock at the .git/maintenance.lock and
.git/schedule.lock respectively. These locks are used to ensure only
one maintenance process is executed at the time as both operations
involves writing data into the git repository.
The path to the lock file is built using
"the_repository->objects->odb->path" that results in SEGFAULT when we
have no repository available as "the_repository->objects->odb" is
set to NULL.
Let's teach maintenance command to use RUN_SETUP option that will
provide the validation and fail when running outside of a repository.
Hence fixing the SEGFAULT for all three operations and making the
behaviour consistent across all subcommands.
Setting the RUN_SETUP also provides the same protection for all
subcommands given that the "register" and "unregister" also requires to
be executed inside a repository.
Furthermore let's remove the local validation implemented by the
"register" and "unregister" as this will not be required anymore with
the new option.
Signed-off-by: Rafael Silva <rafaeloliveira.cs@gmail.com>
Reviewed-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
A lazily defined test prerequisite can now be defined in terms of
another lazily defined test prerequisite.
* sg/tests-prereq:
tests: fix description of 'test_set_prereq'
tests: make sure nested lazy prereqs work reliably
Since jgit does not yet work with SHA-256 repositories, mark the
tests that uses it not to run unless we are testing with ShA-1
repositories.
* sg/t5310-jgit-wants-sha1:
t5310-pack-bitmaps: skip JGit tests with SHA256
"git fetch" did not work correctly with nested submodules where the
innermost submodule that is not of interest got updated in the
upstream, which has been corrected.
* pk/subsub-fetch-fix:
submodules: fix of regression on fetching of non-init subsub-repo
The exchange between receive-pack and proc-receive hook did not
carefully check for errors.
* jx/t5411-flake-fix:
receive-pack: use default version 0 for proc-receive
receive-pack: gently write messages to proc-receive
t5411: new helper filter_out_user_friendly_and_stable_output
The command line completion script (in contrib/) learned to expand
commands that are alias of alias.
* fc/bash-completion-alias-of-alias:
completion: bash: improve alias loop detection
completion: bash: check for alias loop
completion: bash: support recursive aliases
When a repository's leading directories contain regex metacharacters,
the config calls for 'git maintenance register' and 'git maintenance
unregister' are not careful enough. Use the new --fixed-value option
to direct the config machinery to use exact string matches. This is a
more robust option than escaping these arguments in a piecemeal fashion.
For the test, require that we are not running on Windows since the '+'
and '*' characters are not allowed on that filesystem.
Reported-by: Emily Shaffer <emilyshaffer@google.com>
Reported-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The config builtin does its own regex matching of values for the --get,
--get-all, and --get-regexp modes. Plumb the existing 'flags' parameter
to the get_value() method so we can initialize the value-pattern argument
as a fixed string instead of a regex pattern.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The git_config_set_multivar_in_file_gently() and related methods now
take a 'flags' bitfield, so add a new bit representing the --fixed-value
option from 'git config'. This alters the purpose of the value_pattern
parameter to be an exact string match. This requires some initialization
changes in git_config_set_multivar_in_file_gently() and a new strcmp()
call in the matches() method.
The new CONFIG_FLAGS_FIXED_VALUE flag is initialized in builtin/config.c
based on the --fixed-value option, and that needs to be updated in
several callers.
This patch only affects some of the modes of 'git config', and the rest
will be completed in the next change.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The 'git config' builtin takes a 'value-pattern' parameter for several
actions. This can cause confusion when expecting exact value matches
instead of regex matches, especially when the input string contains
metacharacters. While callers can escape the patterns themselves, it
would be more friendly to allow an argument to disable the pattern
matching in favor of an exact string match.
Add a new '--fixed-value' option that does not currently change the
behavior. The implementation will be filled in by later changes for
each appropriate action. For now, check and test that --fixed-value
will abort the command when included with an incompatible action or
without a 'value-pattern' argument.
The name '--fixed-value' was chosen over something simpler like
'--fixed' because some commands allow regular expressions on the
key in addition to the value.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
The --replace-all option was added in 4ddba79d (git-config-set: add more
options) but was not tested along with the 'value-pattern' parameter.
Since we will be updating this option to optionally treat 'value-pattern'
as a fixed string, let's add a test here that documents the current
behavior.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Without additional modifiers, 'git config <key> <value>' attempts
to set a single value in the .git/config file. When the
value-pattern parameter is supplied, this command behaves in a
non-trivial manner.
Consider 'git config <key> <value> <value-pattern>'. The expected
behavior is as follows:
1. If there are multiple existing values that match 'value-pattern',
then the command fails. Users should use --replace-all instead.
2. If there is no existing values match 'value-pattern', then the
'key=value' pair is appended, making this 'key' a multi-valued
config setting.
3. If there is one existing value that matches 'value-pattern', then
the new config has one entry where 'key=value'.
Add a test that demonstrates these options. Break from the existing
pattern in t1300-config.sh to use 'git config --file=<file>' instead of
modifying .git/config directly to prevent possibly incompatible repo
states. Also use 'git config --file=<file> --list' for config state
comparison instead of the config file format. This makes the tests
more readable.
Signed-off-by: Derrick Stolee <dstolee@microsoft.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
When a packed object is stored in a multi-pack index, but that pack has
racily gone away, the MIDX code simply calls die(), when it could be
returning an error to the caller, which would in turn lead to
re-scanning the pack directory.
A pack can racily disappear, for example, due to a simultaneous 'git
repack -ad',
You can also reproduce this with two terminals, where one is running:
git init
while true; do
git commit -q --allow-empty -m foo
git repack -ad
git multi-pack-index write
done
(in effect, constantly writing new MIDXs), and the other is running:
obj=$(git rev-parse HEAD)
while true; do
echo $obj | git cat-file --batch-check='%(objectsize:disk)' || break
done
That will sometimes hit the error preparing packfile from
multi-pack-index message, which this patch fixes.
Right now, that path to discovering a missing pack looks something like
'find_pack_entry()' calling 'fill_midx_entry()' and eventually making
its way to call 'nth_midxed_pack_entry()'.
'nth_midxed_pack_entry()' already checks 'is_pack_valid()' and
propagates an error if the pack is invalid. So, this works if the pack
has gone away between calling 'prepare_midx_pack()' and before calling
'is_pack_valid()', but not if it disappears before then.
Catch the case where the pack has already disappeared before
'prepare_midx_pack()' by returning an error in that case, too.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
In 17c35c8969 (packfile: skip loading index if in multi-pack-index,
2018-07-12) we stopped loading the .idx file for packs that are
contained within a multi-pack index.
This saves us the effort of loading an .idx and doing some lightweight
validity checks by way of 'packfile.c:load_idx()', but introduces a race
between processes that need to load the index (e.g., to generate a
reverse index) and processes that can delete the index.
For example, running the following in your shell:
$ git init repo && cd repo
$ git commit --allow-empty -m 'base'
$ git repack -ad && git multi-pack-index write
followed by:
$ rm -f .git/objects/pack/pack-*.idx
$ git rev-parse HEAD | git cat-file --batch-check='%(objectsize:disk)'
will result in a segfault prior to this patch. What's happening here is
that we notice that the pack is in the multi-pack index, and so don't
check that it still has a .idx. When we then try and load that index to
generate a reverse index, we don't have it, so the call to
'find_pack_revindex()' in 'packfile.c:packed_object_info()' returns
NULL, and then dereferencing it causes a segfault.
Of course, we don't ever expect someone to remove the index file by
hand, or to be in a state where we never wrote it to begin with (yet
find that pack in the multi-pack-index). But, this can happen in a
timing race with 'git repack -ad', which removes all existing packs
after writing a new pack containing all of their objects.
Avoid this by reverting the hunk of 17c35c8969 which stops loading the
index when the pack is contained in a MIDX. This makes the latter half
of 17c35c8969 useless, since we'll always have a non-NULL
'p->index_data', in which case that if statement isn't guarding
anything.
These two together effectively revert 17c35c8969, and avoid the race
explained above.
Co-authored-by: Jeff King <peff@peff.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
While help.autocorrect can be set to 0 to decline auto-execution of
possibly mistyped commands, it still spends cycles to compute the
suggestions, and it wastes screen real estate.
Update help.autocorrect to accept the string "never" to just exit
with error upon mistyped commands to help users who prefer to never
see suggested corrections at all.
While at it, introduce "immediate" as a more readable way to
immediately execute the auto-corrected command, which can be done
with negative value.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
Now that we can override the default branch name in the tests via
`GIT_TEST_DEFAULT_INITIAL_BRANCH_NAME`, we should avoid expecting a
particular hard-coded name.
So let's rename the initial branch immediately to `primary` and work
with that.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
